Home » English Home » Products » Knock Monitor

KSIC - Knock Sensor Interface Cable


 

knock_cable_1.jpg

KSIC is an interface cable which mentions in which and conducts image analysis of the engine sound containing knock sound by the personal computer or a PCM recorder.

FFT spectrum analysis of an engine knock, a misfire, and an engine noise can be realized combining analysis software with budget prices.

The adjustment based on old "feeling" to "both an analysis picture and sound" is attained.

The sensor part of KSIC is fixed to an engine block with a bolt, and an attached pin plug is only connected to the microphone input plug of a PCM recorder or a notebook PC.

Software



Sample file

knock_pc.jpg
To personal computer

knock_pcm.jpg
To PCM Recorder


 Frequency range
  1kHz to 18kHz+
 Output voltage
  20mV （1 to 18kHz） averag
 Linearity
  +-15%  （1 to 18kHz）average
 Sensor hole diameter  8.4mm（+-0.5mm） M8 to M10 bolt
 Cable length
 2.5m
 Temperature  -40dig C to150dig C （Sensor）
 Connector
  3.5mm Gilding stereo pin plug
 (One channel is used)

 

KSIC
Knock Sensor Interface Cable

Made in Japan